Whats up guys, have a quick question for you. I just drop my s2000, 2' (9 loops) front 1.8' (8 loops) in the back, but the back looks lower than the front, please let me know if I installed it right or if it's suppose to look like that!!!

 

did you measure your ride height before you put them on and then after you got them on remeasure?If so and the rear is lower something is not on correct maybe not sitting in the perch correctly in the front would me my guess and would be the first thing i would look at.Second i would insure that i didnt put the back springs on the front.

 

ok how can i measure it with the front fender is sitting high then the back one is?? or does that matter??

 

You should lower them evenly. Is this coild over ?

 

no springs!!!

 

May be that is the problem.

 

what do u mean? whats wrong is with spring's???

 

Oh, this is not a coild but the lowered springs.. Sorry for thre mis-understanding. 1/4 is different isn't that bad.

 

It doesnt matter because you get your base measurement before you lower it just like it sits and then after you lower it measure the same way you did the base mesurement. How high the fenders are has nothing to do with it, its the measured change that means something. The number that you get after you subtract Your lowered mesurement from the base mesurement.