Quote:
Originally Posted by StreetLegal 2.2
I installed the Rotora Big Brake Kit on my AP2 S2000. I started Saturday and finished Sunday.
I have WORK Emotion KAI on 18"x7.5 with and offset of +42 on the front.
1. You have to cut part of the dust covre or splash guar with the dremel.
2. At least with my wheels I had to put two 3mm = 6mm spacers because the wheel touched the caliper when it rotates.
3. Because I put the spacers I needed to install longer wheel bolts M12x1.5.
The difficult part here is to take the hub out to change the wheel bolts.
http://www.libertypr.net/asier/ap2rotora.jpg
Good luck to everybody. |
That is awesome information. Thank you. Have you lower your car & how much clearance does the tire has between the fender? And how is the brake?