S2000 Forums - View Single Post - FS: PAC SWI-PS dash interface + other stereo installation components (SoCal)

mrmunsell · 01-27-2007, 11:41 PM

SOLD and SHIPPED.

I removed my aftermarket audio system and went back to stock in my 03 S2K. I have the related installation components for sale. Everything is about two months old and completely functional.

Lucid door speaker adapter + extra depth kit + cut foam baffle (pair)
PAC SWI-PS* (interface Pioneer / Sony head unit with dash controls)
Head unit interface harness
Door speaker wire harness (pair)
Mute relay with harness
-red = connect to dash control mute (purple wire from head unit harness)
-white = connect to stereo mute input (light blue wire on Sony head units)
-black = connect to ground

*The unused wires (for S2K application) were extracted from the SWI-PS harness for a cleaner install. They were extracted from the connector rather than being cut and will be included in case you want to re-insert them for install in another application (However, the catch is that I don't have the pin outs for those so you would have to get that from PAC or someone else with one of these).

Asking $60.00.

I'm in the West Los Angeles area (Playa del Rey). I'll ship anywhere USPS or FedEx delivers, at buyer's expense.

01-27-2007, 11:41 PM	#1 (permalink)
mrmunsell Junior Member Join Date: Jan 2007 Posts: 4	FS: PAC SWI-PS dash interface + other stereo installation components (SoCal) SOLD and SHIPPED. I removed my aftermarket audio system and went back to stock in my 03 S2K. I have the related installation components for sale. Everything is about two months old and completely functional. Lucid door speaker adapter + extra depth kit + cut foam baffle (pair) PAC SWI-PS* (interface Pioneer / Sony head unit with dash controls) Head unit interface harness Door speaker wire harness (pair) Mute relay with harness -red = connect to dash control mute (purple wire from head unit harness) -white = connect to stereo mute input (light blue wire on Sony head units) -black = connect to ground *The unused wires (for S2K application) were extracted from the SWI-PS harness for a cleaner install. They were extracted from the connector rather than being cut and will be included in case you want to re-insert them for install in another application (However, the catch is that I don't have the pin outs for those so you would have to get that from PAC or someone else with one of these). Asking $60.00. I'm in the West Los Angeles area (Playa del Rey). I'll ship anywhere USPS or FedEx delivers, at buyer's expense.