Damn CEL again (again)

Dr. Jimbo · 11-16-2009, 04:05 PM

Driving up the coast in Cambria, that damn CEL came on again.
Just had it scanned and got the P1399, P0301 & P0302. So multiple, #1 and #2 misfire. I'll try swapping coil packs 1 & 2 with 3 & 4 and see what happens. (That is, when I can find my tools after the move a couple of months ago). And yes, my gas cap is on many, many clicks.

chazdawg35 · 11-16-2009, 06:49 PM

Well that Sucks Doc, if you need some help let me know!

Dr. Jimbo · 11-17-2009, 11:03 AM

Thanx Dawg. If I can't get to my tools this weekend, I'll be a'callin'.

chazdawg35 · 11-17-2009, 06:46 PM

Quote:

Originally Posted by Dr. Jimbo

Thanx Dawg. If I can't get to my tools this weekend, I'll be a'callin'.

+1 Dude! I have a feeling your going to need some coils.

tcgearing · 11-28-2009, 05:19 PM

check your sparkplug torque?i just had the P0303 code flash the cel and found a plug had loosened causing it to pull the threads out of the head.

11-16-2009, 04:05 PM	#1 (permalink)
Dr. Jimbo Top Always Down Join Date: Mar 2007 Location: Santa Barbara, Ca. Posts: 1,751	Damn CEL again (again) Driving up the coast in Cambria, that damn CEL came on again. Just had it scanned and got the P1399, P0301 & P0302. So multiple, #1 and #2 misfire. I'll try swapping coil packs 1 & 2 with 3 & 4 and see what happens. (That is, when I can find my tools after the move a couple of months ago). And yes, my gas cap is on many, many clicks. __________________

11-16-2009, 06:49 PM	#2 (permalink)
chazdawg35 Senior Member Join Date: Jul 2007 Location: simi valley,california Posts: 1,866	Well that Sucks Doc, if you need some help let me know! __________________

11-17-2009, 11:03 AM	#3 (permalink)
Dr. Jimbo Top Always Down Join Date: Mar 2007 Location: Santa Barbara, Ca. Posts: 1,751	Thanx Dawg. If I can't get to my tools this weekend, I'll be a'callin'. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-28-2009, 05:19 PM	#5 (permalink)
tcgearing Junior Member Join Date: Nov 2009 Location: chandler,az Posts: 3	check your sparkplug torque?i just had the P0303 code flash the cel and found a plug had loosened causing it to pull the threads out of the head.