Ultimate Racing Turbo Kit??

berdener · 05-28-2007, 05:15 PM

what do you guys think of this setup here? I might purchase it instead of a vortech supercharger kit (like the turbo more I guess )

http://www.ultimate-racing.com/Produ...eKit-AEM.shtml

S2000808 · 06-18-2007, 04:12 PM

It seems a bit pricey. For less than that you can get a InlinePro kit and make more power.

S2000T · 06-19-2007, 05:11 PM

I think that's a great kit! It is very similar to what I am running, with similar dyno figures. Slightly less power, but broader delivery. I have mine designed to kick in with the vtec at 6k rpm. I have been running for 2 years now with around 10psi boost and stock internals without problem, so should be reliable.

You may be able to put a similar kit together yourself to save $ but not sure it would be worth it.

I don't know about the Inline Pro kit referred to by S2000808, but the only guys I know of who have gone above the mid 300whp have done the engine internals as well. Honed block, sleeved, low compression pistons, valves, porting etc. This is a big jump in cost and then drive train needs to be looked at too.

Enjoy it, Good Luck!

05-28-2007, 05:15 PM	#1 (permalink)
berdener Junior Member Join Date: May 2007 Posts: 19	Ultimate Racing Turbo Kit?? what do you guys think of this setup here? I might purchase it instead of a vortech supercharger kit (like the turbo more I guess ) http://www.ultimate-racing.com/Produ...eKit-AEM.shtml

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
comptech supercharger vs ultimate racing turbo	lilken	All Other Honda S2000 Related Discussions	5	02-25-2007 10:53 PM
Powehouse Amuse or Ultimate Racing Turbo	Batmobile9	All Other Honda S2000 Related Discussions	7	10-27-2004 10:31 AM
comptech supercharger vs. UR Turbo Kit	sooner71085	All Other Honda S2000 Related Discussions	4	04-01-2004 08:25 PM
Supercharging system - Turbo kit	Red	All Other Honda S2000 Related Discussions	2	10-01-2003 09:44 PM

06-18-2007, 04:12 PM	#2 (permalink)
S2000808 Junior Member Join Date: Jun 2007 Posts: 7	It seems a bit pricey. For less than that you can get a InlinePro kit and make more power.

06-19-2007, 05:11 PM	#3 (permalink)
S2000T Junior Member Join Date: Oct 2006 Posts: 11	I think that's a great kit! It is very similar to what I am running, with similar dyno figures. Slightly less power, but broader delivery. I have mine designed to kick in with the vtec at 6k rpm. I have been running for 2 years now with around 10psi boost and stock internals without problem, so should be reliable. You may be able to put a similar kit together yourself to save $ but not sure it would be worth it. I don't know about the Inline Pro kit referred to by S2000808, but the only guys I know of who have gone above the mid 300whp have done the engine internals as well. Honed block, sleeved, low compression pistons, valves, porting etc. This is a big jump in cost and then drive train needs to be looked at too. Enjoy it, Good Luck!