Throttle body

chaddy1984 · 02-05-2008, 06:55 AM

any good throttle bodies out theyre that dont cost a fortune??? any dyno stats on them???

desmo4 · 02-05-2008, 07:16 AM

What size are you looking for?

Jonathan

chaddy1984 · 02-07-2008, 07:43 AM

the best why? you got one?

bobby2002s2k. · 02-07-2008, 09:37 AM

Here ya go maybe you would like this. http://www.maxbore.com/

chaddy1984 · 02-08-2008, 12:29 PM

well i need some info you guys i was told that a 64 mm tb is the best way to go bc any bigger will mess with the ecu

D1sclaimer · 02-08-2008, 09:07 PM

Quote:

Originally Posted by chaddy1984

well i need some info you guys i was told that a 64 mm tb is the best way to go bc any bigger will mess with the ecu

I may be wrong, so don't quote me on this, I beleive our s2ks come with a 64mm TB. I bought a 68mm skunk2 TB, but haven't put it on yet. I know skunk2 makes them up to 70mm for the s2k. The spoon tb is also 70mm. Also, the science of speed s2k bore is also to 70mm. I think the main problem here is that your gas mileage would drop. If everyone makes them to 70mm, i don't think you should have a problem. Ill post back after I put mine on to tell if it changes anything.

Sideways · 02-11-2008, 12:56 PM

Quote:

Originally Posted by D1sclaimer

I may be wrong, so don't quote me on this, I beleive our s2ks come with a 64mm TB. I bought a 68mm skunk2 TB, but haven't put it on yet. I know skunk2 makes them up to 70mm for the s2k. The spoon tb is also 70mm. Also, the science of speed s2k bore is also to 70mm. I think the main problem here is that your gas mileage would drop. If everyone makes them to 70mm, i don't think you should have a problem. Ill post back after I put mine on to tell if it changes anything.

Stock is 62.5mm and the standard overbore is 64mm. Proflow does a reasonable overbore quickly for about $200. I had lots of success with mine.

skatin_s2000 · 02-11-2008, 07:44 PM

i have a skunk 2 68 mm myself, (not installed yet) but the reason i like the skunk is that it bypasses the coolant passage that the factory tb has. also the overbore size

02-05-2008, 06:55 AM	#1 (permalink)
chaddy1984 ROOkie Join Date: Nov 2007 Location: SC BABY Posts: 153	Throttle body any good throttle bodies out theyre that dont cost a fortune??? any dyno stats on them???

02-05-2008, 07:16 AM	#2 (permalink)
desmo4 Senior Member Join Date: Oct 2007 Posts: 401	What size are you looking for? Jonathan __________________ MY 2000 Mugen Air box, Headers, Exhaust, ECU, Pressure Plate,LSD, Radiator cap NZ Dampers, Thermo SW and Thermostat. 66 mm Throttle body, Sampco intake pipe and radiator hoses, Swift sway bars, Stillen rotors w/ M-tech extreme pads. BBS JDM Forged Wheels.w/ Potensa Re=01R's Nextgear Intake manifold gasket, SPA gauges, Alpine IDA-X001,KCE-300Bt BT Adapter, Focal 165 K2P speakers, Boston 10.5LF Subwoofer, Phoenix Gold ZX475Ti & Xenon X600.1 Sub Amp, Recaro Profi SPG w/Sparco 6 pt

02-07-2008, 09:37 AM	#4 (permalink)
bobby2002s2k. S2K 4 life!! Join Date: Nov 2007 Posts: 258	Here ya go maybe you would like this. http://www.maxbore.com/ __________________ ITs been over a year and i still cant keep my foot off the floor!

02-08-2008, 12:29 PM	#5 (permalink)
chaddy1984 ROOkie Join Date: Nov 2007 Location: SC BABY Posts: 153	tb well i need some info you guys i was told that a 64 mm tb is the best way to go bc any bigger will mess with the ecu

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-07-2008, 07:43 AM	#3 (permalink)
chaddy1984 ROOkie Join Date: Nov 2007 Location: SC BABY Posts: 153	the best why? you got one?

02-11-2008, 07:44 PM	#8 (permalink)
skatin_s2000 NA, theres no other way Join Date: Feb 2008 Location: carson, california Posts: 53	i have a skunk 2 68 mm myself, (not installed yet) but the reason i like the skunk is that it bypasses the coolant passage that the factory tb has. also the overbore size