Wheels on ebay

sittin-sidwayz · 05-20-2008, 11:58 AM

Would these fit on a s2000??

http://cgi.ebay.com/ebaymotors/ws/eB...TQ:MOTORS:1123

archs2000 · 05-20-2008, 12:23 PM

pretty sure, that is if you don't want to keep a staggered setup

dezignpro04 · 05-20-2008, 12:32 PM

They will, but not going staggered will affected the cars handling. Also putting 18x8 up front is kinda big. You could always run 18x8 all the way around with maybe 235 up front and 245 or 255 in back but you will need to modify the cambers to get them to roll under the fender. Remember that the OEM is (if I am not mistaken) 7 inches wide up front and 7.5 wide in the back. They are very nice rims, would look great on a Silver with red interior, or maybe my car. lol. But IMHO I wouldnt put 18x8 up front.

just my 02..

U.C.M S2K · 05-20-2008, 12:33 PM

m.... i m thinking about getting this rims.. does anyone knows more detail for this rim.. cuz i just bought my s2000 last year .. wut kind of rim should i get? i have bk s2k.. i m thinking about this brand.. is this good for s2k?

dezignpro04 · 05-20-2008, 12:40 PM

Quote:

Originally Posted by U.C.M S2K

m.... i m thinking about getting this rims.. does anyone knows more detail for this rim.. cuz i just bought my s2000 last year .. wut kind of rim should i get? i have bk s2k.. i m thinking about this brand.. is this good for s2k?

It's not as much "brand" as it is application (aka size).

Start by reading my post above yours...

kgf3076 · 05-20-2008, 05:43 PM

Following are the specs for the fronts and rear wheels. Pay particular attention to the offsets, they are most important followed closely by the bolt pattern.

Fronts - 17x7.5 (diameter x width), +52 (offset), 5x114.3 (bolt pattern)

Rears - 17x8.5(diameter x width) , +59 (offset), 5x114.3 (bolt pattern)

desmo4 · 05-20-2008, 06:24 PM

Or 16 x 6.5 offset +53 front
16 x 7.5 offset + 65 rear

Jonathan

s2000isu · 05-20-2008, 09:07 PM

Ask java I think he made a booboo once ordering rims. What did you ever do with those rims java?

JOECHY · 05-20-2008, 11:30 PM

Quote:

Originally Posted by kgf3076

Following are the specs for the fronts and rear wheels. Pay particular attention to the offsets, they are most important followed closely by the bolt pattern.

Fronts - 17x7.5 (diameter x width), +52 (offset), 5x114.3 (bolt pattern)

Rears - 17x8.5(diameter x width) , +59 (offset), 5x114.3 (bolt pattern)

Are you refering to stock wheels 2004+?

kgf3076 · 05-21-2008, 02:10 AM

Quote:

Originally Posted by JOECHY

Are you refering to stock wheels 2004+?

This is the specs for the Mugen wheels which will fit any S2k...they are designed for exact fit.

Java Junky · 05-21-2008, 03:03 AM

Yep isu, yuh remember correctly.
Deep in the throes'a shiny-bauble-induced desire (Thinkin' with partz'a the body meant fer other thingz) I allowed myself ta be conned by a salesman ta the tune'a set'a 5-Zigenz.
Bottom line is they haven't godd'em with the adequate positive offset necessary to properly fit Stewie'z rear. End result wuz, once mounted, rough pavement (A given locally) n' heavy cornerin' reminded me of my ol' Physicz teacher goin' on about "Impenetrability": No two objects can occupy the same space at the same time.
Currently, two'uv'em'r pullin' duty'z dusty, good-lookin' paperweightz out in'a garage.
The scrounger "borrowed" this from another site'n it's posted in the wheelz/suspension section, but evidently, ain't alodda memberz whut wanna go lookin'.
Whoops! 'Seem to've lost it. 'Be right back.

Okay, fer some reason it ain't allowin' me to copy'n paste.
It'z on the 5th page of the threadz listed under the wheelz/suspension topic.
Java

05-20-2008, 11:58 AM	#1 (permalink)
sittin-sidwayz The Man Join Date: Apr 2008 Location: Philly, Pa Posts: 149	Wheels on ebay Would these fit on a s2000?? http://cgi.ebay.com/ebaymotors/ws/eB...TQ:MOTORS:1123 __________________

05-20-2008, 12:32 PM	#3 (permalink)
dezignpro04 All MOTOR S2K Join Date: Apr 2008 Location: Sunshine State Posts: 917	They will, but not going staggered will affected the cars handling. Also putting 18x8 up front is kinda big. You could always run 18x8 all the way around with maybe 235 up front and 245 or 255 in back but you will need to modify the cambers to get them to roll under the fender. Remember that the OEM is (if I am not mistaken) 7 inches wide up front and 7.5 wide in the back. They are very nice rims, would look great on a Silver with red interior, or maybe my car. lol. But IMHO I wouldnt put 18x8 up front. just my 02.. __________________ Mods: 18" Axis Reverbs w/Black Rays Lugs, Invidia N1 Exhaust, CAI, ACT Stage 2 Clutch, JDM Side Markers, Clear Corners, Slotted/Drilled Rotors, Spoon Pads, Spoon Steel Brake Lines, Spoon Reservoir Socks, Type R Shift Knob, Custom Stitched Hand Made Convertible Top w/ Glass Window, JDM Aero Screen, Body Matching Dash & Shift Molding Panels, Polished Valve Cover and CAI, Engine Steel Braided Wire Kit & S2000 Caliper Vinyls..

05-20-2008, 05:43 PM	#6 (permalink)
kgf3076 Grumpy old(er) phart Join Date: Oct 2006 Location: At home for a change... Posts: 1,351	Following are the specs for the fronts and rear wheels. Pay particular attention to the offsets, they are most important followed closely by the bolt pattern. Fronts - 17x7.5 (diameter x width), +52 (offset), 5x114.3 (bolt pattern) Rears - 17x8.5(diameter x width) , +59 (offset), 5x114.3 (bolt pattern) __________________ NOTICE: Due to Presidential Executive Orders, the National Security Agency may have read this email without warning, warrant, or notice. They may do this without any judicial or legislative oversight. You have no recourse nor protection save to use Pig-Latin for all your messages. "The BS stops when the green flag drops". In memory of David Weber - Malvern Racing

05-20-2008, 06:24 PM	#7 (permalink)
desmo4 Senior Member Join Date: Oct 2007 Posts: 492	Or 16 x 6.5 offset +53 front 16 x 7.5 offset + 65 rear Jonathan __________________ MY 2000 Mugen Air box, Headers, Exhaust, ECU, Pressure Plate,LSD, Radiator cap NZ Dampers, Thermo SW and Thermostat. 66 mm Throttle body, Sampco intake pipe and radiator hoses, Swift sway bars, Stillen rotors w/ M-tech extreme pads. BBS JDM Forged Wheels.w/ Potensa Re=01R's Nextgear Intake manifold gasket, SPA gauges, Alpine IDA-X001,KCE-300Bt BT Adapter, Focal 165 K2P speakers, Boston 10.5LF Subwoofer, Phoenix Gold ZX475Ti & Xenon X600.1 Sub Amp, Recaro Profi SPG w/Sparco 6 pt

05-20-2008, 09:07 PM	#8 (permalink)
s2000isu Senior Member Join Date: Oct 2006 Location: pa Posts: 1,108	Ask java I think he made a booboo once ordering rims. What did you ever do with those rims java? __________________ S2kx2: "paint it pink! Or better yet buy a Miata" 2001 Vortech SC 12.8 at 111 miles per hour

05-20-2008, 12:23 PM	#2 (permalink)
archs2000 Junior Member Join Date: Dec 2007 Posts: 1	pretty sure, that is if you don't want to keep a staggered setup

05-20-2008, 12:33 PM	#4 (permalink)
U.C.M S2K Member Join Date: Feb 2008 Posts: 80	m.... i m thinking about getting this rims.. does anyone knows more detail for this rim.. cuz i just bought my s2000 last year .. wut kind of rim should i get? i have bk s2k.. i m thinking about this brand.. is this good for s2k?

05-21-2008, 03:03 AM	#11 (permalink)
Java Junky Resident Curmudgeon Join Date: Jun 2005 Location: Joisey Posts: 5,290	Yep isu, yuh remember correctly. Deep in the throes'a shiny-bauble-induced desire (Thinkin' with partz'a the body meant fer other thingz) I allowed myself ta be conned by a salesman ta the tune'a set'a 5-Zigenz. Bottom line is they haven't godd'em with the adequate positive offset necessary to properly fit Stewie'z rear. End result wuz, once mounted, rough pavement (A given locally) n' heavy cornerin' reminded me of my ol' Physicz teacher goin' on about "Impenetrability": No two objects can occupy the same space at the same time. Currently, two'uv'em'r pullin' duty'z dusty, good-lookin' paperweightz out in'a garage. The scrounger "borrowed" this from another site'n it's posted in the wheelz/suspension section, but evidently, ain't alodda memberz whut wanna go lookin'. Whoops! 'Seem to've lost it. 'Be right back. Okay, fer some reason it ain't allowin' me to copy'n paste. It'z on the 5th page of the threadz listed under the wheelz/suspension topic. Java __________________ In life-long pursuit of that most mythic of beasts: the ever-elusive perfect corner. Well . . . that, r' at least a whole lodda clear spin-out room. Last edited by Java Junky : 05-21-2008 at 03:09 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode